Description
Cirrus Aircraft 20902-007 Fitting — Airbag Seatbelt Inflator to Hose
The fitting between the AmSafe airbag seatbelt inflator assembly and its hose, listed in the interior installation (IPC 25-10-01). This is the fitting only, not the inflator.
Fit, per the Cirrus Illustrated Parts Catalog:
- SR20 serials 2339 and up, plus specific earlier serials listed in the IPC
- SR22 serials 4435 and up and SR22T serials 1473 and up, plus specific earlier serials listed in the IPC
An IPC note on the earlier serials requires a specific inflator assembly to be replaced with 20902-006 and this fitting to be installed. Check the notes in IPC 25-10-01 for your serial.
Serial ranges are transcribed from the Cirrus IPC. Confirm your aircraft's serial number, installed equipment and service bulletin compliance against current Cirrus documents before ordering.
Reference only — not a maintenance authority. The part numbers, effectivity and service bulletin references shown above are published as an aid to our customers and may not reflect current Cirrus data. They must not be used as the basis for installation. Mechanics must obtain and use their own current Cirrus Illustrated Parts Catalog and the current revision of any service bulletin, and must verify applicability against the aircraft serial number, service bulletin compliance and any installed STCs, before ordering or installing any part.
