Description
Cirrus Aircraft 15946-001 Inspection Hole Cover — Forward, Horizontal Stabilizer
Forward inspection hole cover (patch) on the horizontal stabilizer, listed in the horizontal stabilizer installation (IPC 55-10-01), two per aircraft. The Cirrus description reads 1.0 in closeout, 72 rib.
Fit, per the Cirrus Illustrated Parts Catalog:
- SR20 serials 1423 and up; earlier serials after SB2X-55-10
- SR22 serials 0875 and up; earlier serials after SB2X-55-10
- SR22T serials 0001 and up
Serial ranges are transcribed from the Cirrus IPC. Confirm your aircraft's serial number, installed equipment and service bulletin compliance against current Cirrus documents before ordering.
Reference only — not a maintenance authority. The part numbers, effectivity and service bulletin references shown above are published as an aid to our customers and may not reflect current Cirrus data. They must not be used as the basis for installation. Mechanics must obtain and use their own current Cirrus Illustrated Parts Catalog and the current revision of any service bulletin, and must verify applicability against the aircraft serial number, service bulletin compliance and any installed STCs, before ordering or installing any part.
