Description
Cirrus Aircraft 70062-001 6-Point Engine Mount Conversion Kit — SR22, SB2X-71-06
SB2X-71-06 converts early SR22s from the original four-point engine mount to the six-point mount used in later production. In the six-point design the engine is bed-mounted on a tubular steel weldment with six semi-focal mount fittings and conventional elastomeric isolators.
Refer to SB2X-71-06 for its compliance requirements and full applicability.
What the kit does: Supplies the parts for the six-point engine mount conversion; the bulletin carries the full parts list.
Note: The Cirrus maintenance manual shows the six-point mount on SR22 serials 0610 and 0656 and subsequent from production; earlier SR22s have the four-point mount unless converted under this bulletin. Kit 70062-002 is the single-exhaust version. Refer to SB2X-71-06 to confirm which kit applies before ordering.
Reference only — not a maintenance authority. The part numbers, effectivity and service bulletin references shown above are published as an aid to our customers and may not reflect current Cirrus data. They must not be used as the basis for installation. Mechanics must obtain and use their own current Cirrus Illustrated Parts Catalog and the current revision of any service bulletin, and must verify applicability against the aircraft serial number, service bulletin compliance and any installed STCs, before ordering or installing any part.